ChragePipesCivicXFMIC.jpg
16-21 Honda Civic Forced Induction

PRL 16+ Honda Civic 1.5T Intercooler Charge Pipe Upgrade Kit

$374.99

Part Number: PRL-HC10-CP

Details: Intercooler Charge Pipe Upgrade Kit

Fitment Notes:

  • FITS ALL 2016+ 1.5T HONDA CIVIC MODELS INCLUDING SI, NON-SI, 6MT, CVT, RHD, INTERNATIONAL MODELS, ETC

  • ONLY FITS PRL MOTORSPORTS INTERCOOLER UPGRADE - COMBO LISTING HERE - V1 (CAST END TANK) INTERCOOLER DOES NOT REQUIRE ADAPTER

  • PLEASE CALL OR EMAIL IF PAIRING WITH V1 INTERCOOLER

Please Read Before Ordering:

  • DOES NOT REQUIRE TUNE

Technical Notes:

Our upgraded charge pipe kit utilizes smooth flowing, larger inner diameter hot (1.50" factory compared to 2.00") and cold-side (1.5" factory compared to 2.5") for increased airflow and factory diameter hot-side outlet to aid in turbocharger spool. 4-ply silicone couplers are used throughout our design for a couple of reasons:

  1. Heat-soak reduction: Silicone hose offers extremely low thermal heat transfer properties, especially in comparison to steel or aluminum.

  2. Strength and rigidity: The rubber hoses used from the factory are known to experience expansion, which worsens as boost is increased. In time, the rubber construct weakens, causing increased likeliness of a boost leak. Also, we have managed to melt the factory rubber hose a handful of times during our track adventures on our shop car. Our high-temp, 4-ply silicone with handle the high temperatures of the turbocharger much better than the factory rubber hose(s).

  3. Smooth airflow: Custom molded silicone allows us to offer much higher flowing bends than we could with metal tubing.

  4. Optimal fitment: We have found that the factory rubbers hoses don't offer the most desirable fitment, especially when paired with an aftermarket radiator. Our silicone hose(s) offer even better fitment than factory.

Kits will come with all hardware needed for a seamless install.

 

Kit Includes:

  • (1) Hot Side Charge Pipe

  • (1) Cold Side Charge Pipe w/ Methanol Injection Bung & Machined Billet Aluminum Flange

  • (1) -4AN O-Ring to 1/4" Hose Barb (Pre-Installed in Cold Side Charge Pipe)

  • (1) 1/8” NPT Pipe Plug (Pre-Installed in Methanol Injection Bung)

  • (1) Mounting Bracket for Cold Side Charge Pipe

  • (4) 4-Ply Silicone Coupler

  • (8) 304 Stainless Steel Worm Clamp

  • (2) Charge Pipe Adapters

Performance Gains:

  • Increased efficiency & consistency in power delivery

Quantity:
Add To Cart
ChragePipesCivicXFMIC.jpg
1.5TColdSideChargePipeNewBracket.jpg
15TChargePipeBungUpgrade.jpg
ChargePipeComparison4.jpg
ChargePipeComparison5WithWaterMethBung.jpg
CivicXBilletFMICAssembly.1.jpg
CivicXBilletFMICColdSideAngle.1.jpg
ColdSideAdapter.jpg
ColdSideEndTank.jpg
ColdSidePiping.jpg
FlangeandBracketonPipe.jpg
HotSideAdapter.jpg
HotSideEndTankConnectionChargePipe.jpg
HotSidePiping.jpg
1.5TFMICUpgradedChargePipeAssembledFUllViewPassengerSideTopAngle1FADEDOUT.1.jpg
NOLOGOREVISION1.5TFMICUpgradedChargePipeFrontViewFinalWithTextFADED.jpg