blox.JPG
08-14 Subaru WRX & STI Studs

BLOX Racing Subaru Xtreme Titanium Wheel Studs 12 x 1.25mm - 08-14 Subaru WRX / STI

$188.00

Part Number: BXAC-00181

Description: BLOX Racing Subaru Xtreme Titanium Wheel Studs 12 x 1.25mm - Set of 10

Fitment: 08-14 Subaru WRX / STI

Details:

  • Manufactured From Ti64 Titanium 

  • Reduce Rotational Mass

  • Corrosion & Fatigue Resistant

  • Each Extended Stud Weighs Approximately 34 Grams

WHEEL STUD SPECS

  • Thread pitch: 12x1.25mm

  • Total length: 78.85mm

  • Thread length: 58mm

  • Head diameter: 20mm

  • Base thickness: 2.85mm

We are proud to introduce a solution to common wheel stud failures - our new Blox Racing Xtreme Titanium Wheel Studs. These lightweight wheel studs are manufactured from aerospace grade Ti64 Titanium. We chose Titanium for our Xtreme line, because it is resistant to the constant heating and cooling cycles common to wheels that will destroy steel studs and bolts. Our Xtreme Wheel Studs will not corrode or rust and they offer 50% in weight savings over old school steel studs. Upgrade to our New Titanium Wheel Studs today and never get a failed stud again! 

WHAT YOU NEED TO KNOW:

> Subaru models up to 2007 do not require the hub to be pressed out to install Blox Xtreme Titanium Wheels Studs; 2008+ models require the hub to be removed.

> If you use our titanium studs and titanium lug nuts you must use generous amounts of anti-sieze to avoid galling.

> Precision Ti64 spline results in no welding or spinning of the stud in the hub.

> Each Extended Stud weighs 34 grams. Compare to the factory wheel stud weight of 37 grams and ARP wheel studs of 68+ grams.

Extended wheel studs are available in sets of 10 and single piece set.

Single-piece wheel studs are available and are ideal for when replacing only a few old or damaged studs.

FYI: Wheel studs must properly be pressed in using a mechanical or hydraulic press.

Quantity:
Add To Cart
blox.JPG
blox2.JPG
blox3.JPG
blox4.JPG