Part Number: 15130201

Description: Ridetech 06-15 Mazda Miata (NC) HQ Series Coilovers System

Fitment: 06-15 Mazda Miata

Details:

Mazda Miatas, particularly in the “Spec Miata” competition configuration, are the most commonly campaigned vehicle by amateur racers on tracks around the world on any given weekend. And if you’ve ever taken the time to drive or ride in one, it’s easy to see why. Colin Chapman, the legendary Formula One Lotus car builder, is often remembered for his mantra of: “Simplify, then add lightness.” The Miata has both of those characteristics in spades. 

Ridetech’s HQ series coil-overs further improve the handling capabilities of the third generation Miata, offering a digressive valve package that inspires confidence and encourages enthusiasts to push harder into each turn. Fox Factory ride-height and rebound-adjustable monotube coil-overs ratchet up the performance potential for anyone behind the wheel. 

Despite being hard-mounted at both the top and bottom, the coil-overs provide performance without unwanted NVH, making these a great upgrade for anyone desiring track capable tunability without over compromising such that the vehicle is no longer enjoyable for daily driver duties.

Ridetech recommends setting ride height at 12.75” front and 13” in the rear. This equates to a 1.5” front height reduction and 1.375” out back. Selected spring rates are 575 lbs./inch in front and 350 lbs./inch in back.   

FEATURES & BENEFITS:

• USA designed & manufactured in Ridetech’s ISO 9001 certified Jasper, Indiana facility

• Pre-assembled for bolt-on installation | Application specific mounting for a seamless installation

• Fox Factory shock internals & valving along with monotube design provide excellent ride quality and handling

• Impact forged aluminum shock body provides excellent strength-to-weight ratio

• Double digressive valve package perfectly suited to NC Mazda Miata chassis improves handling and performance | Much higher low speed dampening without undesirable high-speed damping. 

• HQ coil-overs features 24-position rebound adjustability to fine-tune vehicle responsiveness 

• Shock Travel gains | Front +3/4’’ more compression travel over OE | Rear +1.5’’ compression travel while only losing 5/16’’ of droop to OE

• Shock Stroke | Front = 6.3” or 160mm | Rear = 6.9” or 175mm

• Spring Rates | Front = 575 lb/in (10 kg/mm) | Rear = 350 lb/in (6 kg/mm)

• Allows ride height adjustment to suit user preference | Recommend 12.75” ride height in front | 13” in rear | Measured from fender lip to wheel center

• Included Hyperco springs provide consistent spring rates at each corner

• Ridetech’s standard 1,000,001 Mile Warranty

• Durable Type 3 Hard Coat Anodized provides attractive finish & corrosion protection

• Custom spring rates available if desired (additional cost applies)